276
15. System settings
15.1. Equaliser
Under
EQUALIZER
, you can select a default sound format or configure your own.
Select one of the following sound formats:
NORMAL, FLAT, JAZZ, ROCK, MOVIE, CLASSIC, POP, NEWS
or
MY EQ
and press
OK
to confirm. The setting will take effect immediately.
The sound format is preset to
NORMAL
. The best sound format for
playing music is the setting
ROCK
.
MY EQ
If you have selected a personalised sound format under the following entry, se-
lect
MY EQ
to take over the sound format directly.
MY EQ SETTINGS
Set your personalised sound format for
MY EQ
here.
Set the bass, treble and volume by turning the
VOLUME OK
controller on the
device or by pressing the corresponding navigation buttons on the remote con-
trol and press the
OK
button to store the entry.
Press
YES
to confirm the subsequent prompt and to store the sound format.
15.2. Internet settings
Configure the internet settings under
INTERNET SETTINGS
.
15.2.1. Network wizard
Select
NETWORK WIZARD
to start searching for networks.
Then enter the WEP/WPA key to connect the device with the wireless AP.
15.2.2. Establishing a WPS connection
You can establish a WPS connection under
PBC WLAN SETUP
:
Activate the WPS connection on the device, which supports WPS and then con-
firm the connection on the internet radio. To do this, select
YES
and press
OK
to confirm.
15.2.3. Displaying settings
Information about the currently connected network and the device’s MAC address is
displayed under
VIEW SETTINGS
.
15.2.4. Manual settings
Under
MANUAL SETTINGS
, select wireless connection (WLAN) and set the
DHCP function to
DHCP ENABLE
or
DHCP DISABLE
.
