265
DE
EN
ES
FR
IT
NL
7.3.2. Establishing a connection to a network
The names (SSID) of the networks found are shown in a list. WLAN Access Points
that provide connections via WPA are indicated with
[WPS]
.
Beneath this, you will see:
RESCAN
: start a new search
MANUAL CONFIG
: enter connection data manually
Then turn the
VOLUME OK
controller on the device or press the correspond-
ing navigation buttons on the remote control to select the WLAN Ac-
cess Point for connection with the internet radio. Press the
VOLUME OK
con-
troller on the device or
OK
on the remote control to confirm your selection.
In case of an unencrypted (open) WLAN Access Point, the internet radio establishes
the connection automatically.
To connect with an encrypted network, observe the following sections.
WLAN connection via WPS
Once a WLAN network providing the option to connect via WPS has been selected,
the WPS menu appears. If you do not want to establish a connection via WPS, select
SKIP WPS
here.
WPS button
Select
PUSH BUTTON
to enable the WPS function to be used via the router’s
WPS button.
Then press the WPS button on the router and press
OK
to confirm the connec-
tion with the internet radio.
You can also access the WPS function at any time
1
by pressing and hold-
ing the
INFO
button.
To this end, please also note the information in your router’s user man-
ual.
•
The device will now establish a connection with the network. Once the connec-
tion is successful, a corresponding notice is then displayed.
•
The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
•
The device stores the connection data so that it does not need to be re-entered
to re-establish the connection.
1
In internet radio mode, you can only use the WPS function via the set-up wizard.
