33
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
Start automatic search process
In DVB-T mode, press the
U G C T E J
button.
Confirm with
G P V G T
.
or
Press the
U G V W R
button.
Select the
INSTALLATION
menu option and the
AUTO SCAN
option. Confirm
your selection with
G P V G T
.
Select the desired options for the search process and start the search by using the
arrow keys to select the
ENTER STARTS SEARCH
menu option and start the
search by pressing
G P V G T
.
Any channels already found will be listed during the search process.
At the end of the search process, the device switches to the first channel on the
channel list automatically.
EPG and channel organisation
Open the electronic programme guide using the
C P I N G 1 G R I
button (
EPG
=
“Electronic Programme Guide”).
A list of channels appears with list numbers and channel names.
You can select a different channel using the
buttons. Press
G P V G T
to switch
directly to this channel.
The channel’s current EPG programme is displayed in the table on the right-hand side.
To switch to the EPG programme, press button
.
Use the
buttons to select the current or later broadcast from the programme.
Press
to go back to the programme list.
To close the
EPG
, press
C P I N G 1 G R I
again.
PLEASE NOTE!
Please note that the entries that appear are dependent on the
broadcasters. Many broadcasters also do not have any EPG programme
available.
Displaying current channel information
You can use this as an aid when searching for the ideal location for the receiver aerial.
Choose a location with the highest possible signal strength and quality
Press the
F K U R N C[
button twice to display all information about reception of the
channel currently being played.
PLEASE NOTE!
The signal strength and quality of the aerial signal is shown in the bottom
section of this menu as a bar chart.
