20
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
General notes on operation
Operating the player using the controls on the player
or remote control
Buttons on the device
You can activate the main play functions of your player using the buttons on the
device.
Buttons on the remote control
In addition to the basic controls, the remote control also provides numerous additional
options for using all functions of your DVD player.
In these instructions, we refer to the remote control buttons. If reference is made to the
controls on the device itself, this will be clearly indicated.
Switching on/off; standby mode
Turn the power on using the
K 1 2
switch on the left-hand side of the device by
switching it to the
K
position. When switched on and in standby mode, the
operating LED lights up red.
Turn the device on by pressing the button on the remote control or on the
device.
Press the button again to turn the device back to standby mode.
To turn the power off, use the
K 1 2
switch on the left-hand side of the device and
switch it to
2
position.
Select operating mode
On the remote control
Press on of the following buttons on the remote control to select an operating
mode:
•
F X F 1 W U D 1 E C T F
: to change between DVD and USB/CARD mode
•
F X F 1 F X D / V
: to change between DVD and TV mode
•
F X F 1 CX " K P
: to change between DVD and AV IN mode
All mode selections must be made via the DVD mode. I. e. when you want to change
from TV mode to USB mode, press
F X F 1 F X D / V
first, followed by
F X F 1 W U D 1
E C T F
to change to the USB mode.
On the device
• Press
the
U Q W T E G
button to choose DVD, card or USB mode.
• Press
or
to choose the desired source.
Confirm the operating mode by pressing the
G P V G T
button.
Press the
F X F 1 F X D
button to switch between DVD and DVB modes.
