16
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
Using the device for the first time
Inserting the battery in the remote control
The battery is already inserted in the remote control upon delivery. To activate the
remote control, remove the insulation strip with the notice “Please remove before
use” from the underside of the remote control.
Charging the battery of the device
Before using the device without mains power, you must fully charge the battery. A
green LED indicates the battery is charged.
If the device is switched on while charging the battery, the charging process will
take significantly longer.
Plug the supplied adaptor into the DC IN 9V–12V socket on the device.
Plug the adapter into an easily accessible socket. The charger LED on the DVD
player turns red while the battery is charging.
Wait until the charger LED turns green. A green charger LED indicates the battery is
charged.
With a fully charged battery you can operate the device for approx. three hours.
Connecting the car adapter
Plug the car adapter for the device into the DC IN 9–12 V socket on the DVD player.
Connect the car adapter to a suitable car socket, e.g. the car’s cigarette lighter.
When the car adapter is connected the battery will charge while the device is switched
off (see above).
PLEASE NOTE!
Please take this into account when the engine is switched off. The car
battery may be drained!
