17
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
Changing the battery of the remote control
The remote control requires one 3 V button battery, type CR2025.
WARNING!
There is a risk of explosion if batteries are replaced incorrectly.
Replace batteries only with the same or equivalent type.
Press the latch and pull out the battery compartment.
Remove the old battery and take it to a used battery collection point for proper
disposal.
Insert a fresh CR 2025 battery into the battery compartment with the positive pole
facing up. Ensure the +/- terminals are correct.
Slide the compartment back into place.
Mains connection
ATTENTION!
Use only the mains adapter supplied with the device (model:
KSAS0150900150HA, manufacturer: Kuantech Shenzhen Co., Ltd.).
Once you have made all the connections, connect the plug to the mains (240 V ~
50 Hz).
Aerial (TV mode)
For TV mode, connect the supplied aerial to the ANT aerial socket on the left-hand
side of the device.
Next, select TV mode using the
F X F 1 F X D V
button.
Position the aerial for good reception (e.g. near a window). You can check the
reception quality by pressing the
F K U R N C[
button twice.
