143 * 210 mm
17. Aug. 2010
Start-up
21
Esp
a
ñol
English
Deutsch
Codes
After switching on the device for the first time
After switching on the device for the first time, you will be guided through the initial
installation process:
First Time Installation
. This can be called up any time via the
menu
SETUP > First Time Installation
and can be carried out again. See also page
32.
Use the direction buttons to select the language and then press
OK
.
Use the direction buttons to select the country. The country setting will affect the
sequence in which the channels will be stored. Press
OK
. The search starts.
Searching occurs in the order of the various programme types. Wait for it to finish.
You can use the
MENU
button to cancel the search prematurely.
Note
Remember to connect a DVB-T aerial if you are searching for digital
programmes.
Programme selection
To select a programme, either press the buttons
P+/–
(on the device or on the
remote control) or select the programme directly by pressing the appropriate
number button.
Enter the numbers directly in sequence for a two-digit or three-digit number.
Use the button
to select the last programme played back.
