143 * 210 mm
17. Aug. 2010
English
16
One-second or three-second intervals
If you would like the remote control to transmit a new code every three seconds
instead of every second, proceed as follows:
Press
P/CH+
(or
) twice. The remote control will now only transmit a new code
every three seconds. This gives you more time, but the procedure will also take
longer.
Code search by brand name
This function allows you to search by brand name. You will find the brand name in
the list below. Proceed as follows:
Switch on the relevant device manually.
Briefly press the required source button (
STB
,
DVD
,
VCR
,
AUX
).
Keep the
CODE
button pressed for approx. three seconds until the blue LED stays
lit.
Enter the one-digit code according to the list. Here’s an excerpt:
Button 1
TEVION, MEDION
Button 2
Philips, Radiola, Philco, Erres, Pye
Button 3
Sony, Akai, Panasonic, JVC, Sharp, Toshiba, Daewoo
Button 4
Thomson, Brandt
Button 5
Saba, Nordmende, Telefunken
Button 6
Grundig, Blaupunkt
Button 7
Nokia
Button 0
All brands
Continue pressing the
P+
button (or for video recorders
or PLAY
), until the
device responds appropriately. Proceed quickly, otherwise the automatic code
search will start.
Save the code by pressing
OK
.
After all the codes have been searched, the blue LED will flash for approx. three
seconds.
