Mediana A16M-DF-0E, Operator'S Manual

Page: 40 / 63

MEDIANA
HEART ON
AED A16
Automated External Defibrillator
36
36
Note: If the shock cancel (when the pad connector is disconnected, the patient ECG,
impedance, or mode is changed) has been occurred 3 times, the AED is
performing the CPR process after the voice prompt “ Shock cancelled ” is emitted.
Note: If the pad connector is not connected in any step except for Step 4 (CPR), the AED
will move to Pad connector disconnected icon and the voice prompt
“
Plug in pads.
Insert connector firmly.
”
is emitted.
Note: If the pad is disconnected during Step 4 (CPR), the AED move to the pads
disconnected icon after completing the CPR and if the pad connector is connected
to the AED, it moves to the Step 1.
Performing CPR
After the electric shock is delivered, you will hear the voice prompts:

“It is safe to tou
ch t
he patient.”
CPR Feedback option is disabled:
 “Begin CPR . ”
CPR Feedback option is enabled:
 “ Place CPR device in center of patient ’ s chest and begin CPR. ”
Perform CPR according to the voice prompt of the AED.
In case of AED with CPR Feedback option, depending on the pressing speed and
strength you will hear the voice prompts:

“
Press slower.
”
CPR feedback: compression rate is too fast. Do chest compression in accordance
with the beep sound.

“
Press faster.
”
CPR feedback: compression rate is too slow. Do chest compression in accordance
with the beep sound.

“
Press softer.
”
CPR feedback: compression depth is too deep. Decrease the strength.

“
Press harder.
”
CPR feedback: compression depth is too shallow. Increase the strength.
In case of AED with CPR Feedback option, depending on the pressing speed and
strength you will hear the complex voice prompts:

“
Press slower and softer
.”
CPR feedback: compression rate is too fast and compression depth is too deep. Do
chest compression in accordance with the beep sound and decrease the strength.

“
Press slower and harder.
”
CPR feedback: compression rate is too fast and compression depth is too shallow.
Do chest compression in accordance with the beep sound and increase the
strength.

“
Press faster and softer.
”
CPR feedback: compression rate is too slow and compression depth is too deep.
Do chest compression in accordance with the beep sound and decrease the
strength.
 “ Press faster and harder. ”
CPR feedback: compression rate is too slow and compression depth is too shallow.
Do chest compression in accordance with the beep sound and increase the
strength.