MediaFORM CD-5916 Operator'S Manual Download Page 2 | Manualshive

Page: 2 / 64

background image

CD-5916

Operator’s Guide

Document Revision: 060102

Page 1

Copyright Notice

Copyright ©1996-2002 by MediaFORM, Inc. All rights reserved.

This manual and the accompanying illustrations may not be copied, reproduced,
electronically transmitted, or translated into another language, in whole, or in part,
without the written consent of MediaFORM, Inc.

CD2CD, CD2CD PRO, CD-5400L, CD-5908, CD-5916, CD 3701, CD-
3703, CD-3706P, cdDIRECTOR, AP-1301i/t, Easi-DAT and Easi-AUDIO
are trademarks of MediaFORM, Inc.

Other trademarks referred to are the property of their respective trademark or
registered trademark holders.

Warranty

MediaFORM, Inc. warrants to the original purchaser that the equipment that you have purchased is free from
defects in materials and workmanship, for a period of time as follows:

Duplicator Electronics & Mechanical Parts

1 year

CD-R/RW Recorders

1 year

This warranty is applicable when the warranty registration has been completed and returned to MediaFORM, Inc.
within a reasonable period of time following the purchase and the warranty is NOT transferable. This warranty
does not apply to malfunctions caused by misuse, negligence, accident, or alteration, nor is MediaFORM, Inc.
responsible for consequential damages related to the use of this equipment.

This warranty is made in lieu of any other warranty expressed or implied.

CD-R/RW Recorder Warranty Policy

Individual CD-R/RW recorder manufacturers are responsible for the products they provide. As a convenience,
MediaFORM, Inc. will honor any service issue related to a defective recorder while under its respective
manufacturer’s warranty providing that the recorder has been purchased from MediaFORM, Inc. either directly
or indirectly. MediaFORM, Inc. assumes no responsibility for products NOT purchased through MediaFORM,
Inc.

Piracy

The copying of audio, video, or software without the permission of the copyright holder is illegal. MediaFORM,
Inc. accepts no responsibility for the copyright use or misuse of this equipment. It is the sole responsibility of the
user to ensure that the legal rights of copyright in duplicating are respected.

MediaFORM, Inc.

400 Eagleview Blvd.
Exton, PA. 19341
Tel.:

(610) 458-9200

Fax.:

(610) 458-9554

Email: [email protected]
www:

http://www.mediaform.com

«
1
2
3
4
...
»

Summary of Contents for CD-5916

































































Reviews:

No comments

Related manuals for CD-5916

Brand: StarTech.com Pages: 16

Brand: Pioneer Pages: 12

Brand: Addonics Technologies Pages: 2

Brand: StarTech.com Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands