Media5 Mediatrix 4104, Reference Manual

Page: 67 / 466

Configuration File Download Reference Manual (SIP Version)
Mediatrix 4104 45
Automatic Update on Restart
The Mediatrix 4104 may download new configuration files each time it restarts.

To set the automatic update every time the Mediatrix 4104 restarts:
1. Set the configuration file server host and port as defined in “Configuration File Server Settings” on
page 39 .
2. Place the configuration files to download on the computer hosting the HTTP or TFTP server.
These files must be in a directory under the root path.
3. If not already done, set the transport protocol and configuration file path as described in “Setting up
the Configuration File Download” on page 40 .
4. In the Automatic Update section of the Configuration File page, select Enable in the Configuration
File Update On Restart field.
Figure 21: Management – Automatic Update section
The automatic configuration update will be performed each time the Mediatrix 4104 restarts.
The unit configuration is only updated if at least one parameter value defined in the downloaded
configuration files is different from the actual unit configuration.
5. Click Submit if you do not need to set other parameters.
Automatic Update at a Specific Time Interval
You can configure the Mediatrix 4104 to download new configuration files at a specific day and/or time.

To set the automatic update at a specific time interval:
1. Set the configuration file server host and port as defined in “Configuration File Server Settings” on
page 39 .
2. Place the configuration files to download on the computer hosting the HTTP or TFTP server.
These files must be in a directory under the root path.
3. If not already done, set the transport protocol and configuration file path as described in “Setting up
the Configuration File Download” on page 40 .
4. In the Automatic Update section of the Configuration File page, select Enable in the Configuration
File Periodic Update field.
Caution:
When downloading via HTTP, the configuration file server’s port must be 80. You can see the
actual port assigned in the Status section of the Configuration File page.
If you are using a DHCP server and it did not provide the proper port, reconfigure it with the proper port or
use a static configuration. See
“Configuration File Server Settings” on page 39 for more details.
4
Caution:
When downloading via HTTP, the configuration file server’s port must be 80. You can see the
actual port assigned in the Status section of the Configuration File page.
If you are using a DHCP server and it did not provide the proper port, reconfigure it with the proper port or
use a static configuration. See
“Configuration File Server Settings” on page 39 for more details.