Media5 Mediatrix 4104, Reference Manual, Page: 61 / 466

Configuration File Download Reference Manual (SIP Version)
Mediatrix 4104 39
Configuring the HTTP Server
If you are to perform a configuration file download by using the HTTP protocol, you must install a HTTP server
running on the PC designated as the server host. It is assumed that you know how to set the root path. If not,
refer to your HTTP server’s documentation.
Configuration File Server Settings
The Mediatrix 4104 must know the IP address and port number of its configuration file server. This server
contains the configuration file the Mediatrix 4104 will download. You can assign these information to the
Mediatrix 4104 through a DHCP server or manually enter them yourself.

To set the configuration file server parameters:
1. In the web interface, click the Management link, then the Configuration File sub-link.
Figure 18: Management – Configuration File Web Page
2. Select how configuration files are downloaded in the File Fetching Mode drop-down menu.
Table 29: File Fetching Mode Parameters
Parameter Description
Disabled Does not perform a configuration file download.
Use
Management
Server Configuration files are sent by the management server upon request. The
management server is the initiator of the TFTP session.
Automatic
Update Configuration files are automatically fetched by the unit. Refer to “Automatic
Configuration Update” on page 44 for details. The unit is the initiator of the
transfer sessions. This method facilitates the NAT traversal.
2
3
4
5