manualshive.com logo in svg

Media5 Mediatrix 4104, Reference Manual, Page: 360 / 466

Share
Download
Media5 Mediatrix 4104 Reference Manual Download Page 360

Chapter 27 - Quality of Service (QoS)

VLAN

338

 

Mediatrix 4104

To enable the VLAN configuration:

1.

In the 

qosVlanIeee8021q 

group

 

of the 

qosMIB

, locate the 

qosVlanIeee8021qTaggingEnable

 

variable.

2.

Set the value of this parameter to 

enable

.

The VLAN configuration is enabled.

3.

Locate the following variables:

•

qosVlanIeee8021qVirtualLanID

•

qosVlanIeee8021qDefaultUserPriority

When both VLAN tagging and VLAN Substitution are enabled and their VLAN ID is the same, VLAN 
Tagging has precedence over VLAN Substitution. If VLAN Substitution has the same ID as VLAN 
Tagging, VLAN Substitution is not enabled and the Mediatrix 4104 behaves as such. You should 
change the ID of one of the features to enable VLAN Substitution. See 

“VLAN Substitution” on 

page 338

 for more details.

4.

Set the value of these variables.

5.

Restart the Mediatrix 4104 so that the changes may take effect.

For more information, please refer to the 

MIB Reference

 manual.

VLAN Substitution

The Mediatrix 4104 can tag the packets relayed from the 

ETH2

 (LAN) port to the 

ETH1

 (WAN) port with a 

VLAN ID different from the standard value defined in 

“VLAN” on page 337

.

In this case, the packets coming from the LAN (usually a router or a PC) are tagged with a substitution VLAN 
ID before sending the packets to the WAN. In the opposite direction, the Mediatrix 4104 removes the VLAN 
tags and then send the packets to the LAN. The packets generated by the Mediatrix 4104 for VoIP/Signaling/
Management can also be tagged with a different VLAN ID. 

This can be used to prioritize VoIP in a network. 

To configure the VLAN substitution:

1.

In the 

qosIeee8021qSubstitution 

group

 

of the 

qosMIB

, define the substitution IEEE 802.1Q Virtual 

LAN ID in the 

qosVlanIeee8021qSubstitutionVlanID

 variable.

The value 1 is the default Port VID (PVID) for bridge port. The 4095 VID (0xFFF) is reserved for 
implementation use and it must not be used in the tag header.

You can use a VID of 0.

As per the standard, some bridges may not support the full range of VID.

When both VLAN tagging and VLAN Substitution are enabled and their VLAN ID is the same, VLAN 
Tagging has precedence over VLAN Substitution. If VLAN Substitution has the same ID as VLAN 
Tagging, VLAN Substitution is not enabled and the Mediatrix 4104 behaves as such. You should 
change the ID of one of the features to enable VLAN Substitution. See 

“VLAN” on page 337

 for more 

details.

2.

Set the substitution IEEE 802.1Q Virtual LAN default user priority in the 

qosVlanIeee8021qSubstitutionUserPriority

 variable.

This value applies to all protocols for which no priority filtering is enabled (e.g. ARP, ICMP).

•

7 = High priority

•

0 = Low priority

3.

Enable the VLAN substitution by setting the 

qosVlanIeee8021qSubstitutionEnable

 variable to 

enable

.

The QoS 802.1q fields of the packets sent from the PC to the WAN are assigned the value defined 
in the 

qosVlanIeee8021qSubstitutionVlanID

 variable.

Note: 

This feature only works when the 

lanStaticAddressActivation

 variable is set to 

vlanSubstitution

. See 

“ETH2 Connector Static IP Address” on page 151

 for more details.

Summary of Contents for Mediatrix 4104



















































































































































































































































































































































































































































































Reviews:

No comments