Media5 Mediatrix 4104, Reference Manual

Page: 113 / 466

Call Forward Reference Manual (SIP Version)
Mediatrix 4104 91
On No Answer
You can forward the incoming calls of your users to a pre-determined target if they do not answer their
telephone before a specific amount of time. The user does not have any feedback that a call was forwarded.

To set the Call Forward On No Answer feature:
1. Select to which port you want to apply the changes in the drop down menu at the top of the window.
2. In the Call Forward on No Answer section, enable the service by selecting Enable in the Allow Call
Forward digits choice.
Figure 47: Telephony – Call Forward on No Answer section
If you select Disable , this will not disable the call forward, but will prevent the user from activating
or deactivating the service. The user will not be able to use the digits used to start and stop the
service.
3. Define the digits that users must dial to start the service in the Digits to enable field.
Define this field only if you want to let the user start the service with his or her handset. If you rather
want to have the control over the activation/deactivation of the service, proceed to Step 6.
For instance, you could decide to put “*74” as the sequence to activate the service. This sequence
must be unique and follow the syntax for digit maps (see
“Digit Maps” on page 71 ). Dialing this digit
map does not have any effect unless the service’s status is “enabled”.
The activating sequence is set for all the lines of the Mediatrix 4104. You cannot have a different
sequence for each line.
4. Define the digits that users must dial to stop the service in the Digits to disable field.
Define this field only if you want to let the user stop the service with his or her handset. If you rather
want to have the control over the activation/deactivation of the service, proceed to Step 6.
For instance, you could decide to put “*75” as the sequence to deactivate the service. This
sequence must be unique and follow the syntax for digit maps (see
“Digit Maps” on page 71 ).
Dialing this digit map does not have any effect unless the service’s status is “enabled”.
The deactivating sequence is set for all the lines of the Mediatrix 4104. You cannot have a different
sequence for each line.
5. Define the time, in milliseconds, the telephone keeps ringing before the call forwarding activates in
the
Timeout Value field.
6. Set the status of the service in the Service Status field to Inactive or Active .
This feature starts the service (active) or stops the service (inactive).
If you want to let the user start or stop the service with his or her handset, you must enter a
sequence of digits in steps 3 and 4. The
Service Status field is automatically updated to reflect the
activation status according to the user’s setting.
7. Define the address to which forward incoming calls in the Forwarding Address field.
Accepted formats are:
• telephone numbers (5551111)
• SIP URLs such as ”scheme:user@host”. For instance, “sip:user@foo.com”.
This string is used literally, so cosmetic symbols (such as the dash in “555-xxxx”) should not be
present.
8. Click Submit if you do not need to set other parameters.
2
3
4
5
7
6