Media5 Mediatrix 4104, Reference Manual, Page: 29 / 466

Panels Reference Manual (SIP Version)
Mediatrix 4104 7
Rear Connectors
The Mediatrix 4104 has several connections that must be properly set. Figure 2 shows the back panel of the
Mediatrix 4104.
Figure 2: Back Panel Connectors
Table 5 describes the back panel connections.
Table 5: Back Connections of the Mediatrix 4104
Connection Description
ETH1 A 10/100 BaseT Ethernet RJ-45 connector for access to a LAN, WAN or
computer. This port is by default used for uplink / WAN connection.
ETH2 A 10/100 BaseT Ethernet RJ-45 connector for access to a LAN, WAN or
computer. This port is by default used for LAN connection.
Bypass ts users to make emergency calls and maintain telephone services in the event
of a power outage or network failure.
Allows its users to maintain telephone services in the event of a power outage or
network failure.
Phone/Fax Port 1 - 4 RJ-11 connectors to attach a conventional telephone or G3 fax machine.
Power connector IEC320-C14 Power Cord Receptacle. This power cord supplies an internal
Switching Mode Power Supply (SMPS) Universal input.
Reset / Default switch Resets configuration parameters of the Mediatrix 4104 to default (known) values.
It can be used to reconfigure the unit.
Warning : Read Section “Reset / Default Switch” on page 18 before attempting to
reset the unit.
External power
supply
RJ-45 connector for 10/
100 BaseT Ethernet
access
RJ-11 connectors for Analog
line device (Connector 1
right)
Default Settings
RJ-11 Bypass
Connector with Port 1
RJ-45 connector for 10/
100 BaseT Ethernet
access to a computer