Medema Mini Crosser M1 Cabin, Service Manual

Page: 31 / 66

PG
DRIVES TECHNOLOGY
7
PC P
ROGRAMMER
-
MOBILITY
SK76668/7
Write Controller - Downloads ALL the program parameter information into the control system connected.
Read Controller - Inputs all the program parameter information from the control system connected.
Preset - Restores all program parameters to factory settings.
3.2.3 Tools
This menu contains specific control system information tools.
Diagnostics - If the connected control system is in a tripped state then this option will display the specific trip code and type.
System Log - Displays the diagnostic Log of the connected control system. Within the window is also the option to clear
the Log information. For detailed information on the System Log window refer to section 4.
Timers - Displays the connected control system’s timer information. This is in the form of an hour read out, which refers
to the time the control system has been driven.
Controller Info - Displays control system specific information such as the identification number.
Protect - Allows PC Programmer to be secured using a password. Once the program has been protected then users
can only Open / Close , Read From / Write To and Program attached control systems.
Comms - Allows the user to select which communication Port to attach the control system to the PC.
File Type - Displays the format in which the file was created. ie. a Dealer or OEM Programmer.
3.2.4 Help
This menu contains specific information about the PC Programmer software.
Contents - Displays the available Help topics. This follows a Windows typical control method.
About Box - Displays the PC Programmer software issue information.
Service manual P9-0151-S 31 of 66 Version 1.0.3/2018
Medema Production A/S
The menus at the bottom of the screen enable you to:
“Copy” – copy the log to another file.
“Warning” – It is important to read and understand warnings
before attempting to correct any errors.
“Print” – print out to a printer
“Clear System Log” – Delete the system log on the PC.
“Clear Control Log” – Delete the vehicle control log.
“OK” – Exit the system log and return to programming.
If the controller connected is in trip condition, information
about the Trip Code and a description may be found using
”Diagnostics”.
Example of trip condition.