Service manual P9-0151-S
15 of 66
Version 1.0.3/2018
Medema Production A/S
Designation
Description
Key switch
To start the vehicle:
Turn the key to driving position (1) When the Mini Crosser
is turned on, the control system performs a safety check of
the electrical system. The check lasts half a second. If the
accelerator is operated during this time, the Mini Crosser will not
be able to move until you have turned the key to 0 and back to 1.
Speed selector
The tortoise in minimum position indicates the lowest speed
range. 0-6 km/h
The hare in maximum position indicates the highest speed
range. Up to 15 km/h
Battery indicator
Lights up when the key is turned. Indicates, after half a
second, the battery charge level. It gives a more precise
indication after approx. 1 minute of driving. When the red,
amber and green sections are lit, the batteries are fully
charged. When the indicator is at the bottom of the amber
section, the batteries should be charged as soon as possible.
If only the red section is lit or flashing, the batteries must be
charged immediately.
Handbrake
Acts on the rear wheel and should only be used as an extra
/emergency brake and parking brake. It can be secured in
locked position. Also available as a foot brake.
Accelerator
Activate the arm at the front slowly and the Mini Crosser will
start to move forwards. The more the arm is pressed, the faster
the Mini Crosser will move. When the arm is released, it will flip
back to starting position of its own accord and the Mini Crosser
will stop. Activating the rear arm will cause the Mini Crosser to
reverse. The magnetic brake on the rear wheels will engage
when the scooter is stationary and is equivalent to the parking
brake on a car. The accelerator can also be used to control
speed downhill. In this case the motor will act as a brake.
Light switch
Turns on the front and rear lights. The key switch must be in
position 1 (driving position).
Hazard warning
lights
Turns on all the indicator lights at once. Also works when the
key is removed or turned to position 0 (stop position).
Indicator switch
Left arrow: indicator, left-hand side. Right arrow: indicator, right-
hand side. Activate the same switch to turn the indicators off.
Horn
Powerful electric horn. Press the horn switch to activate.
Charging socket
Turn off the key switch during charging. Please note that it is
not possible to drive the scooter while the batteries are char-
ging. See also the section entitled “Batteries and charging”.
Windscreen wiper
Starts the windscreen wiper. Notice the variable speed
ajustment.
windscreen
washer
Spraying washer fluid on the front window.
Heat regulation
Adjustable heat in the cabin. Note: Heat can be turned on
even if the key is not in the key switch. Heating ribs should
NOT be covered.
REMEMBER! turn off the heat when you leave the vehicle.
Otherwise the batteries may be flat the next time you want to
use it.
Summary of Contents for Mini Crosser M1 Cabin
