mectron Multipiezo, Use And Maintenance Manual

Page: 33 / 76

27
FLuSH FuNCTION
To enter the flushing mode, select “pump/
flush” menu on the touch keyboard: all
the other selection options present on
the display are disabled;
NOTE: The “flush” mode can be
interrupted at any time by pressing the
“pump/flush” key again. The keyboard
will be reactivated and configured with
the last setting used.
3
perio/scaler perio/scaler
restorative restorative
To start the “pump/flush” function while
the writing “pump/flush” is flashing,
press the pedal once and release it:
the keyboard will stop flashing and the
cleaning cycle will start;
NOTE: The function can be stopped at
any time by pressing “pump/flush” again
or alternatively by pressing the pedal
briefly. The keyboard will be reactivated
and configured with the last setting
used.
4
perio/scaler perio/scaler
restorative restorative
As soon as the peristaltic pump starts, the
entire scale of values in the “irrigation”
section lights up, and during the passage
of the liquid, the irrigation value shifts
from 6 to 0. The cycle lasts 20 seconds.
Once ended, the keyboard will be
reactivated and configured with the last
setting used.
5
20"
After the fluhing cycle of the irrigation circuit move on to disassembing the different parts (see
Chapter 7 on page 28 ) and to their cleaning and sterilization (see Chapter 8 on page 31 ).