mectron Multipiezo, Use And Maintenance Manual

Page: 30 / 76

24
multipiezo
Select the type of function, power and
irrigation necessary and the light if
desired, on the keyboard;
Lift the handpiece and press the pedal to
start treatment;
8
At the end of treatment stow the scaler
handpiece on its support.
CAUTION : Owing to its
conformation, the handpiece can rotate.
When not used the handpiece must
always be put back on its support stand.
NOTE: Remember to empty the tank.
9
5.5 Important Information on the Inserts
WARNING :
• Diamond coated inserts are SINGLE
USE. The diamond coated inserts are
intended to be used on an individual
patient during a single treatment
procedure and then discarded. The
diamond coated inserts cannot therefore
be reprocessed since they cannot be
cleaned properly.Soil residues might
remain adhered to the diamond coating
even after cleaning and sterilization and
enter into the oral cavity of another
patient.
• Before the treatment, check that the
insert is firmly secured to the handpiece.
Properly secure the insert onto the
handpiece using the torque wrench.
• When the titanium nitride coating is
visibly worn out, the insert must be
replaced. Use of an worn out insert
reduces its efficiency.
• Do not activate the handpiece while
the insert is in contact with the part to
be treated. Doing so, will not allow the
electronic control circuit of the ultrasonic
generator to recognize the best point
of resonance of the insert, required for
efficient and optimum performance.
• use the insert/s according to the
working settings reported in the
annexed sheet “Appropriate settings for
the inserts”.
• Always inspect the insert before and
during the operation for any damage.
If a damage or drop in performance
is noted replace it with a new one.
Insert showing signs of deformation or
cracking must be replaced immediately.