MECNOSUD SB Series, Use And Maintenance Manual

Page: 30 / 171

31
MANUAL SHEETER - SB/ST/SF SERIES Use and maintenance manual Edition 10-12
1.7 Safety warnings
INFORMATION
Read these instructions carefully before using the machine.
ATTENTION
In order to prevent dangerous conditions and/or possible injuries caused by electrical
currents, mechanical parts, fire or of a sanitary nature, the following safety warnings
must be observed:
A) Keep the place of work tidy. Untidiness can contribute to danger or accidents.
B) Evaluate environmental conditions. Do not operate the machine in a damp,
wet or insufficiently lit environment or in the vicinity of flammable liquids or gasses.
C) Keep children and unauthorised personnel away. Do not allow them to come near
to the machine or the place of work.
D) Operate the machine within its power rating for its permitted usage. It will operate
better and in a safer fashion if not overloaded.
E) Dress in a suitable manner. Do not wear loose fitting clothes or dangling accessories
that could get caught in the moving parts. Use anti-slip footwear. For sanitary as well
as safety reasons, cover long hair with a suitable net and wear gloves.
F) Protect the power cable. Do not tug the cable to disconnect the supply plug.
Do not expose the cable to elevated temperatures, sharp corners, water or solvents.
G) Avoid unstable positions. Find the most suitable position that always ensures equilibrium.
H) Always pay maximum attention. Observe your own work. Do not operate
the machine when distracted.
I) Disconnect the power supply at the end of operation, before cleaning
and maintenance operations, and before moving the machine.
L) Extension leads must not be used in the open air.
M) Check that the machine is not damaged. Before operating the machine, carefully check
the efficiency of the safety devices. Check that the moving parts are not blocked,
that there are no damaged components, that all of the parts are correctly fitted, and that
all conditions that could influence the regular operation of the machine are optimal.
N) The machine should be repaired by qualified personnel. The repair operations must be
carried out exclusively by qualified people using original replacement parts only.
Failure to observe these precautions can constitute an element of danger for the operator.
ENGLISH