page 12
The offset value provides an indication of the condition of
the torque sensor, and is defined as the % difference
between the critical zero and the current reading.
If the offset is between 5 - 10 %, please contact your
supplier to arrange a re-calibration of your Orbis.
If the offset is greater than 10 %, please contact your
supplier to arrange for a torque sensor replacement.
These values are given as an indicator only - the need for
calibration/repair may vary according to the individual
characteristics of the torque sensor.
In addition to the offset, the number of overloads (OL)
experienced by the torque sensor in both clockwise and
counter-clockwise directions are displayed. An overload is
registered when a torque exceeding 150% of the rated
capacity of the torque sensor is applied in either direction.
To exit the torque sensor diagnostic test screen, press
MAX
.
Fig. 4
