Measurement Computing USB-5100 Series Software Help Download Page 7

Page: 7 / 65

Chapter 1

Introducing USB-5100 Series

USB-5100 Series is used for launching, reading out, and plotting data from USB-5100 Series data loggers.



Launch and read out USB-5100 Series data loggers



Check the logger status and current readings



Plot, filter, and export data



Save changes to graphs in a project file

Getting Started

Follow the instructions in the

USB-5100 Series Getting Started

to install the software, connect your logger,

launch, and readout data. You can expect to be comfortable with software fundamentals within a few minutes.

For an introduction to the software interface, see

A Tour of the USB-5100 Series Interface

Installing USB-5100 Series Software

You can download and install USB-5100 Series software from the MCC website.

Note:

You must be an administrator to install USB-5100 Series software.

If you have additional questions, please contact MCC Technical Support.

Installing USB-5100 Series Software

Refer to the

ReadMe.rtf

file installed with the software for detailed information about the system

requirements needed to run USB-5100 Series.

Installing on Windows

You must be an administrator to install USB-5100 Series.

Download the USB-5100 Series for Windows from

www.mccdaq.com/software.aspx

Run the

USB-5100 Series_Setup.exe

installer file and follow the onscreen instructions.

The Java™ Runtime Environment is required. If the correct Java Runtime Environment version is not
already installed on your computer, the setup program asks if you want to install it. Click

Yes

and follow

the prompts. After the Java Runtime Environment is installed, the software installation continues.

Launch the software by double-clicking the USB-5100 Series icon

The software is installed by default to \Measurement Computing\USB-5100 Series.

Installing on Macintosh

Oracle Java is available from

www.java.com

. Download a disk image for the Java Runtime Environment

(JRE) for Java 7 or higher and install it before installing the USB-5100 Series software.

Download the USB-5100 Series for Mac OS X from

www.mccdaq.com/software.aspx

Launch the

USB-5100 Series.pkg

file, and follow the onscreen instructions.

Click

Restart

when you reach the final screen of the installation program. The software does not recognize

your logger until you have restarted.

After restarting, launch the software by double-clicking the USB-5100 Series icon in the computer

Applications

folder.

Checking for Software Updates

Periodically check for updates to USB-5100 Series at

www.mccdaq.com/software.aspx

Summary of Contents for USB-5100 Series

































































Search results

Summary of Contents for USB-5100 Series

Reviews:

Related manuals for USB-5100 Series

Brands by name

Popular brands

Measurement Computing USB-5100 Series, Software Help

Search results

Summary of Contents for USB-5100 Series

Reviews:

Related manuals for USB-5100 Series

Brands by name

Popular brands