Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
•
Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
99
99
4.6 Status LEDs
4 status LEDs can be freely configured on the unit. Each LED can react either to button actuation,
internal objects or external objects.
4.6.1 LED basic settings
The LED basic settings affect all active status LEDs.
The following figure shows the available settings:
Figure 57: Basic settings
–
Status LEDs
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
LED-colour on button
activation, only with
setting “Object and
button activation”
Any colour
Parameter only has an effect with LED
setting "LED x reacts to
“
external/internal object
and
button
activation".
Lock object for LEDs
▪
not active
▪
active
Activates a lock object which can
disable (= switch off) all LEDs
Behaviour of LEDs at bus
power up
▪
do not request LED
objects
▪
request LED objects
Setting whether to actively request
the objects after a reset.
Only
effective with "LED reacts to
external object
"
Synchronization object
for flashing LEDs
▪
not active
▪
active as master
▪
active as slave
Activating a synchronisation object for
the LEDs
Table 108: Basic settings
–
Status LEDs
