Technical Manual
LED-Indicator
SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
26
26
4.5 Converter function
The following
picture shows the menu “Converter function” in which the converter module A
-D can
be activated:
Figure 17: Converter function
4.5.1 General settings
The following picture shows the general settings for the converter module:
Figure 18: Converter module -> general settings
The following table shows the available settings:
ETS-text
Dynamic range
[default value]
comment
Mode
▪
not active
▪
Byte=>Bit
▪
2 Bit=>Bit
▪
Temperature-
value=>Bit
Setting of the Mode of the Converter:
not active
: Converter module is
deactivated
other modes
are described in the
following chapters in detail
Send behavior
▪
Send after output
change
▪
Send after input
change
Setting the sending behavior of the
output:
Send after output change:
Sending at
every change of any input object
Send after input change:
Sending only
at change of the output