Technical Manual
LED-Indicator
SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
12
12
4 Reference ETS-Parameter
4.1 General settings
The following figure shows the general settings for the LED display:
Figure 3: General settings
The following table shows the available settings:
ETS-text
Dynamic range
[default value]
comment
Startup time
1s
–
60s
[1s]
Time between Reset and functional start
of the device
Send cyclic object operating
▪
not send
▪
10min
–
24h
Adjustment if the operating state should
be send cyclic via an object
Switch Day/Night
▪
Day = 1/Night = 0
▪
Day = 0/Night = 1
Adjustment of the polarity of the
day/night object
Behavior at bus power reset
▪
no read LED
objects
▪
read LED objects
Adjustment if the LED objects should be
read at a reset
Activate alarms
▪
No
▪
Yes
Activation of the alarms
Activate absence
▪
absent at object
value = 0
▪
absent at object
value = 1
Adjustment of the polarity of the
„absent“ telegram
