Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
38
5.4 Meter
The following figure shows the menu meter:
Figure 20: Menu meter
The following table shows the available settings:
ETS-text
Dynamic range
[default value]
comment
Object selection for sub meter
Value in Wh(DPT13.010)
Value in kWh(DPT13.013)
defines if the sub meter is sent in watt
hours or kilo watt hours
Send value of main meter cyclic
no send, 5min-24h
[no send]
defines the sending behavior of the
main meter
Send value of sub meter cyclic
no send, 5min-24h
[no send]
defines the sending behavior of the sub
meter
Behavior after bus power
return
no reset
reset sub meter
reset main and sub meter
defines the behavior after bus power
return
Table 23: Menu meter
Two meters for counting the power consumption are available, the main and the sub meter. The sub
meter can count as well
watt hours as kilo watt hours. So the sub meter can be used for counting
shorter periods.
The following table shows the available objects:
Number
Name
Length
Usage
11
Sub meter
4 Byte
Value of the sub meter
12
Main meter
4 Byte
Value of the main meter
19
Reset sub meter
1 Bit
Reset value of sub meter
20
Reset main meter
1 Bit
Reset value of main meter
Table 24: Communication objects meter
