Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
30
4.3.4 Manual switch off
The following illustration shows the setting options at the ETS-Software:
Figure 15: Manual switch off
By activation this function, you can switch the channel off before the staircase time runs out. For
s it hi g off the ha el, you ha e to se d a logi al
to the communication object for switching
the staircase function (have a look atTable 16: Communication object staircase). When this function
is not activated, the channel switches only off after the staircase time runs out.
4.3.5 Extend staircase time
The following illustration shows the setting options at the ETS-Software:
Figure 16: Extend staircase time
By activating this function, the staircase time is retriggerable. That means, when the staircase time
runs already out to 2/3, you can restart the time by sending a new on-signal to the communication
object of the staircase function (have a look atTable 16: Communication object staircase).
The following diagram shows the behavior of this parameter:
