RF-AKK1ST.01
RF-AZK1ST.01
KNX RF+ Socket
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load. The Socket uses a monosta-
ble relay and can be parameterized individually via ETS. The device provides extensive functions like logical operation,
status response, block functions, central function, delay functions and staircase lighting function. Additionally the device
provides several time and scene control.
The MDT KNX RF+ Socket offers exactly current measurement. In dependence on the parameterization the
measured data can be transmit in different data formats (mA/A/kW) onto the KNX bus. Additionally the device
provides an hour/service interval meter. The integrated counter allows to capture the active power consumption
exactly.
The MDT KNX RF+ Socket is operating in bidirectional KNX RF+ system mode and is perfectly suited for using in
conventionel installations without placing KNX bus cables. The connections to the KNX+ bus is realized via the MDT
KNX RF+ Line Coupler.
If the mains voltage fails, all outputs were switched off. After mains voltage recovery the relay position will be restored.
The MDT KNX RF+ Switch Actuator must be installed in dry rooms.
For project design and commissioning of the MDT KNX RF+ Socket it is recommended to use the ETS.
Please download the application software at www.mdt.de/downloads.html
• Production in Germany, certiied according to ISO 9001
• Commissioning with ETS 5
• New KNX RF+ protocol in system mode
• NO and NC contact operation
• Time functions (switch-on/switch-off delay, staircase light function)
• Status response (active/passive) for each channel
• Logical linking of binary data
• 8 scenes per channel
• Central switching functions and block functions
• Programmable behavior in case of bus voltage failure or return
• Connection via MDT KNX RF+ Line Coupler
• Compatible to the new KNX RF+ speciication
• 3 years warranty
MDT KNX RF+ Socket
Version
RF-AKK1ST.01
KNX RF+ Socket
230VAC, 16A
RF-AZK1ST.01
KNX RF+ Socket with active power measurement
230VAC, 16A
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: + 49 - 2263 - 880
•
Fax: + 49 - 2263 - 4588
•
•
www.mdt.de
Stand: 0716
DIN EN ISO 9001
TAW Cert
Zert.Nr.1905606
N
