Technical Manual RF Socket RF-AxK1ST.01
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
6
2.4 Functions
Every channel can be selected as one of these 3 states:
not active
The channel has no function. So there are no communication objects for this channel shown.
Switch
If the channel is chosen as switch, there will be different parameterization options for
configuring the switching process.
Staircase
Now, the channel can become a staircase light function. This function causes an automatic
switch off of the channel after an adjusted time.
At the RF socket with active power measurement, the following menus are also available:
Active power measurement
The active power measurement can send the current power of the connected load and in
accordance to the value, specific function, such as Send messages and / or switch the
output off, can be triggered.
Current measurement
The current measurement can send the measured current of the connected load and in
accordance to the value, specific function, such as Send messages and / or switch the
output off, can be triggered.
Voltage measurement
The voltage measurement can send the measured current of the connected load and in
accordance to the value, specific function, such as Send messages and / or switch the
output off, can be triggered.
Meter
2 counters, main and sub meters, are available. With these various power measurements
for daily / weekly / monthly or annual values can be realized.
