MDT Technologies JAL-01UP.01, Technical Manual

Page: 45 / 46

MDT Shutter Actuators
N
MDT Shutter Actuator MDRC 2-fold/ 4-fold/ 8-fold
MDT Shutter Actuator surface mounted 4-fold
MDT Shutter Actuator flush mounted 1-fold
Version
JAL-0206.01
Shutter Actuator 2-fold 2TE MDRC, 6A, shutter motors 230VAC up to 300W
JAL-0410.01 Shutter Actuator 4-fold 4TE MDRC, 10A, shutter motors 230VAC up to 600W
JAL-0810.01 Shutter Actuator 8-fold 8TE MDRC, 10A, shutter motors 230VAC up to 600W
JAL-0410D.01 Shutter Actuator 4-fold 4TE MDRC, 8A, shutter motors 24VDC up to 180W
JAL-0810D.01 Shutter Actuator 8-fold 8TE MDRC, 8A, shutter motors 24VDC up to 180W
JAL-0410A.01 Shutter Actuator 4-fold Surface mounted, 10A, shutter motors up to 230VAC up to 600W
JAL-01UP.01 Shutter Actuator 1-fold Flush mounted, 6A, shutter motors 230VAC up to 300W
The MDT Shutter Actuators receive KNX/EIB telegrams and control up to 8 independent shutter or sunblind drives.
Each output uses two monostable relay. The MDRC shutter Actuators can be operated manually via a push button.
The outputs are parameterized individually via ETS3/4. The device provides extensive functions like status response, block
functions, central function and positioning shutters, blinds and other hangings. Additionally the device provides up to 8
scenes per channel.
If the mains voltage fails, all outputs are switched off. After bus voltage failure or recovery the position of the shutter is
selected in dependence on the parameterization. The Shutter Actuator is available as modular installation device, surface
mounted device and flush mounted device for fixed installation in dry rooms.
The MRDC Shutter Actuators use a common power supply terminal for two channels. The surface mounted and flush
mounted Shutter Actuators have a common power supply terminal. This feature simplifies the wiring and increases clarity
of the circuit.
For project design and commissioning of the Shutter Actuator it is recommended to use the ETS3f/ETS4 or later.
Please download the application software at www.mdt.de\downloads.
JAL-0410.01 JAL-0410A.01
JAL-0206.01 JAL-01UP.01
• Push Button and LED indicator for each channel
• Operation mode blind/shutter programmable
• Travel-, pause-at-change-of-direction-
and step time adjustable
• 1-bit automatic function and sun protection
• 8-bit positioning for shutter and blinds
• 8 scenes per channel, alarm, central- and block functions
• Programmable behavior in case of bus voltage
failure or return
• Two contacts share one supply phase (MDRC device)
• Common supply phase (UP and AP device)
• Integrated bus coupling unit
• 3 years warranty
• production in Germany, certified according to ISO 9001
• modern design
• fully compatible to all KNX/EIB devices
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: + 49 - 2263 - 880
•
Fax: + 49 - 2263 - 4588
•
knx@mdt.de
•
www.mdt.de
Stand: 1011
DIN EN ISO 9001
TAW Cert
Zert.Nr.1905606