MDT Technologies JAL-01UP.01, Technical Manual

Page: 22 / 46

Technical Manual Shutter actuator JAL ‐ 0X10X.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
22
4.3 Objects for absolute position/ Status objects
Through activating the objects for absolute position it is possible to drive to absolute positions for
movement and blind positions.
The following illustration shows the possible settings:
Illustration 10: objects absolute position
The following chart shows the setting range for this parameter:
ETS ‐ text Dynamic range
[default value]
comment
Objects for absolute position

not active

active
activate/deactivate the objects for
absolute position
Reaction after driving to
reference

no reaction

drive to former
position
gets only displayed if the objects
are activated;
sets the reaction after a driving to
reference
Status objects

not active

active
enables the status objects
Status object for visualization

Status actual direction

Status of movement
adjusts the status object for the
visualization
Chart 10: setting range absolute position
When the objects for the absolute position are activated, the following objects aredisplayed:
Number Name Length Usage
17 Status actual direction 1 Bit indicates the actual direction of the way of
driving
17 Status of movement 1 Bit indicates an active driving process
18 absolute position 1 Byte utilized for driving the shutter/blinds to a specific
value
19 absolute position of blinds 1 Byte for adjustment of the blinds to a specific value
(only at shutter)
20 Status actual position 1 Byte indicates the actual shutter ‐ /blinds position
21 Status act. position of
blinds
1 Byte indicates the actual position of the blinds (only at
shutter)
22 act. position valid 1 Bit indicates whether a driving to reference was
already conducted