Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
57
6.3 Automatic Mode
The automatic mode can be realized via control value or a Delta T control. The following
communication object switches between automatic and direct mode:
Number
Name
Length
Usage
1
Switching Auto/Manual
1 Bit
Switchover between automatic and manual
mode
Table 49: Communication object - Switchover Auto/Manual
The FanCoil actuator reacts only to control values or temperature values if the automatic mode is
switched on. The selection of the steps in the direct mode is always possible. If a new step is selected
via the direct mode, the FanCoil will be switched into the manual mode and the switchover object
sends the state.
6.3.1 Automatic Mode
–
Control Value
The following figure shows the available settings for the automatic mode via control values:
Figure 47: Automatic Mode - Control value
Summary of Contents for AKK-03UP.02
Page 6: ......
