MDT Technologies AKK-03UP.02, Technical Manual

Page: 15 / 78

Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
•
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.mdt.de
15
6
Automatic mode Switch heating valve DPT 1.001 send Actuator sends
switching telegram separate
switching
channel for
switching the
heating valve of
the FanCoil-
system Object is always shown when
heating mode is active.
7 Automatic mode Switch cooling valve DPT 1.001 send Actuator sends
switching telegram separate
switching
channel for
switching the
cooling valve of
the FanCoil-
system Object is always shown when
cooling mode is active.
8 Automatic mode Manual setpoint offset DPT 1.007 receive Actuator reacts to
incoming telegram Central operation
unit, Visu, Push
Butto …
Object can be activated at
auto ati ode Delta T
27 Automatic mode Temperature value DPT 9.001 receive Actuator reacts to
incoming telegram Temperature-
sensor Object is always shown at
auto ati ode Delta T a d is
used for receiving the current
temperature.
28 Automatic mode Setoint temperature DPT 9.001 receive Actuator reacts to
incoming telegram Central operation
unit, Visu, Push
Butto …
Object is always shown at
auto ati ode Delta T a d is
used for receiving a new setpoint.
29 Automatic mode Setpoint offset DPT 9.002 receive Actuator reacts to
incoming telegram Central operation
unit, Visu, Push
Butto …
Object can be activated at
auto ati ode Delta T a d is
used for receiving a setpoint offset.
30 Automatic mode Current setpoint
temperature DPT 9.001 send Actuator sends state
Visualizatio …
Object is always shown at
auto ati ode Delta T a d is
used for visualization the current
setpoint.