Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
37
The following settings are available:
ETS-text
Dynamic range
[default value]
comment
Send state
no send, passive state
object
at change
at change and lock
always at input of
telegram
Sending behavior of the state
object
Send state cyclic (0 = not
active)
0-30000s
[0s]
Cyclic sending of the state
Additional inverted state
not active
active
Displaying an additional
inverted state
Table 27: State functions
The following sending behavior for the state is available:
no send, passive state object
The state object does not send its current state and can only be requested.
at change
The state object sends its current state at every change of the output.
at change and lock
The state object sends its current state at every change of the output
–
also during the
locking process. By sending the status during the locking is ensured that a switch after locking
sends the correct value.
always at input of telegram
The state is sent at every input of a telegram
–
independent whether the output is changed
or not.
The additional inverted state can be used for visualization, etc. and has always the opposite value of
the or al state.
The following table shows the communication objects:
Number
Name
Length
Usage
7
State
1 Bit
Sends the state of the channel
8
inverted state
1 Bit
Sends the inverted state of the channel
Table 28: Communication objects state function
Summary of Contents for AKK-03UP.02
Page 6: ......