Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
42
5.3.8 Staircase with variable time
The following parameters are available for a variable staircase time:
Figure 25: Parameter variable staircase time
The variable staircase time allows staring the staircase with a variable time. For this purpose, a value
of 0-255 to 1 byte input is sent. The resulting staircase lighting time is calculated as:
sent value x adjusted time factor = staircase time
If a value of 10s is set and the value 55 is sent, the staircase light is started with a time of 550seconds.
The variable staircase time can be used for starting the staircase time in a big staircase at every flor
with an individual staircase time.
The following table shows the available communication object:
Number
Name
Length
Usage
2
Staircase light with time
1 Byte
Starting of the variable staircase time
Table 34: variable staircase time
5.3.9 Prewarning function
The following figure shows the available settings for the prewarning function:
Figure 26: Prewarning function
The prewarning function warns
The warning function warns you before running out of the staircase time (and thus turning off the
channel).
Summary of Contents for AKK-03UP.02
Page 6: ......
