Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
56
6.2 Additional Ventilation
6.2.1 Automatic additional ventilation
The following figure shows the available settings for the automatic additional ventilation:
Figure 45: Automatic additional ventilation
The automatic additional ventilation switches the FanCoil for the adjusted time of the additional
ventilation into the adjusted time if the FanCoil was switched off for the adjusted cycle time. So, the
maximum inactive time of the FanCoil is the adjusted cycle time.
6.2.2 Manual additional ventilation
The following figure shows the available settings for the manual additional ventilation:
Figure 46: Manual additional ventilation
The manual additional ventilation is started by the communication object and switches the FanCoil
for the adjusted time into the adjusted step. After the time for the additional ventilation is elapsed,
the FanCoil switches again to the normal mode and works as before. This function can be used to
ventilate rooms after special events, e.g. taking a shower or cooking.
The following table shows the communication object for activating the manual additional ventilation:
Number
Name
Length
Usage
0
Enable additional
ventilation
1 Bit
Switches the manual additional ventilation on
Table 48: Communication objects additional ventilation
Summary of Contents for AKK-03UP.02
Page 6: ......
