Dynascan Manual (RT3005G) v_0611
Page 74
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Issue 1
14
Maintenance and Care
14.1
General
Dismantling or attempting the repair of a Dynascan system, and associated equipment, by
unauthorised personnel can be hazardous and costly. Maintenance carried out by the
operator, therefore, should be restricted to the cleaning and inspection of external surfaces,
lenses, operating controls etc.
14.2
Preventative Maintenance
The preventative maintenance to be carried out by the operator should include:
14.2.1
In Use
Avoid directing the laser towards the sun or other high power, infrared light source
Avoid mechanical shock
Do not use paint solvents to clean the instrument; use mild detergent applied using a
cloth
Clean and dry the equipment before, during and after use
14.2.2
In storage
Dry the system thoroughly before storing
Correctly pack the equipment in the transit / storage case provided.
Ensure the transit /storage case is kept dry inside
Store within the environmental temperature limits of -25
C to +70
C
14.2.3
In transportation
Correctly pack the equipment in the supplied transit case for transportation
Do not allow the equipment to slide around inside transport vehicles or containers
14.2.4
General
Carry out regular functional testing of the system
Detect and report damage, malfunctions and poor performance
Arrange a yearly calibration: contact MDL or your local service and support centre for
details