Dynascan Manual (RT3005G) v_0611
Page 12
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Issue 1
6.3
Interface Adapter (IA)
The MDL Interface Adapter (IA) provides a stabilised D.C. voltage to the pod components as
well as acting as the interface for the system cables. The IA is fitted with an ON/OFF switch,
which powers the pod and is reverse polarity protected. When the IA is switched on a green
LED will illuminate to indicate that the pod is powered up. The input power requirement for
the IA is 10 – 36 VDC and system power consumption is approximately 25 Watts, for the single
laser head version.