Dynascan Manual (RT3005G) v_0611
Page 36
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Issue 1
11
INS Sensor Setup Parameters
The Dynascan INS sensor is set up in the factory and the only screens the user should change
are the GNSS secondary antenna offsets, RTK baud rate and odometer sensor information (if
this option is purchased).
11.1
Using setup software (RT3005G)
Open RT Config software and select RT 3000
Select Read from RT3000 and click Next
Continue to click Next as you go through the various set up screens.
