Dynascan Manual (RT3005G) v_0611
Issue 1
© Copyright Measurement Devices Limited
Copying of the materials in this document is prohibited
Page 13
6.4
Interconnecting cables
The following cables are supplied with every Dynascan system:
Dynascan Pod to IA cable
CBL 8301A 10009
**
IA power cable
***
(terminated with cigarette lighter connector)
CBL 8302A 10009
*
IA RTK cable
*
(also used for programming the pod radio)
CBL 8303A 10009
IA VRS cable (set for CMR+ input at 115200 baud rate – 8 N 1)
CBL 8304A 10009
IA to laptop Ethernet cable
CBL 8305A 10009
The first part of the cable number is the type number and the second part is the serial
number. You should ensure the serial number of the set of cables in use is the same for all
cables and match the serial number of the pod.
*N.B. This cable must remain connected to the IA during survey work to allow RTK
corrections to be maintained (even though the other end remains unterminated).If the
GNSS receiver includes the option of a fitted RTK radio module this cable is not
required as the radio is programmed through the GNSS receiver software.
**N.B. The power cable cigarette lighter connector is fused and the IA is reverse polarity
protected
CBL 8301A 10009
CBL 8302A 10009