theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f
32 / 45
Safety cable
Handlewheel
This icon on top
Quick release pin
H
OW TO REPLACE A GAS BOTTLE
The Touring rack is equipped with a ball valve on each gas lines.
Therefore, it is possible to replace the gas bottle while the fog
generator is working.
To proceed:
1.
Close the gas bottle
1.
Close the ball valve
2.
Replace the gas bottle (see
How to mount a gas bottle
for more
details)
3.
Open the gas bottle
4.
Open the ball valve
E
XTERNAL FAN
The touring rack comes with an external fan for the MDG theONE.
The 10” external fan (900 CFM, 24 VDC) will improve tremendously the dispersion of the haze
(or the fog) in large areas.
There is two different ways to install the fan on the rack, depending if the user wants to disperse
the fog upward (floor installation), or downward (rigging installation). The fog or haze jets
should never go through the fan.
Upward dispersion
Mount the fan below the fog nozzle for upward fog
dispersion.
Just pin the fan at the position below the nozzle.
Verify the fan support is horizontal,
and insert the quick release pins on
both sides.
Attach
the
safety
cable.
We
recommend having the safety cable
passing inside the fan support, then
several times around structural tube as
shown on the picture.
Valve opened
Valve closed
