MDG theONE 1.30, User Manual

Page: 19 / 45

theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f 19 / 45
Auto/Local
In «Local» Mode («
INTERFACE

COMM.

LOCAL
»), only the keyboard controls the MDG
theONE .
In «Auto» Mode («
INTERFACE

COMM.

AUTO
»), the MDG theONE is controlled via DMX /
RMD if there is a DMX signal on the line, or via the keyboard if there is no signal.
WARNING
In « AUTO Mode » , DMX commands always take precedence over Local
commands
If the DMX Signal is valid, the menus will be partially disable
Unplug the DMX data wire to control the generator locally.
EEPROM Parameters
The following parameters are saved at each time they are modified

Communication Mode AUTO/LOCAL/DMX/ETHERNET

DMX Start Address

Device Label

Universe Name

Units (Pressure)

LCD Saver
Powering off the MDG
theONE , the program saves the last set of parameters as follows:

Mode HAZE / FOG, if User is in Local Mode

HAZE Pressure If User is in Local Mode

FOG Pressure If User is in Local Mode

Universe Address

Total Run Times
At the next start–up, parameters readings automatically configure the menu for the user.
Default parameters will be loaded if the generator is unable to read the parameters (electrical
shutdown during EEPROM writing).