theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f
29 / 45
USB
C
ONTROL AND
D
IAGNOSTIC
The
MDG theONE
can now be connected to a Windows PC via an USB cable and interact with a
Windows dialog Terminal.
Contact the MDG Service to have the last package for the MDG Terminal.
B
OOTLOADER
The
MDG theONE
uses a BootLoader, also called boot manager. This small program is a
firmware (software embedded in a hardware device) located into the non-volatile memory of the
microcontroller unit (MCU) that allows in-circuit reprogramming of the device using its USB
communication ports.
To upgrade the firmware, you will need:
a computer running under windows, with a USB 2.0 connector
special driver for the USB, included in the package,
a standard USB 2.0 cable, A to B Male/Male type
Contact the MDG Service to have the last package firmware upgrade for the
MDG theONE
.
