theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f
31 / 45
Pigtail
JIC fitting
Buckle strap
Buckle Strap
H
OW TO INSTALL THE FLUID RESERVOIR
Place the MDG fog fluid reservoir (Use only MDG Neutral fog
Fluid) in the touring rack.
Attach the buckle strap. We recommend having the buckle strap
passing through the handle of the reservoir as shown on the
picture.
Attach the safety cable. We recommend having the safety cable
passing through the handle, then several times around structural
tubes as shown on the picture.
Replace the seal liquid reservoir cap with the cap equipped with
the liquid line and the vent. Keep seal cap for future use.
Insert the liquid line in the liquid input fitting (push-in fitting).
H
OW TO MOUNT A GAS BOTTLE
Depending of the height of your bottle (maximum of 915 mm, i.e.
36"), you may use the lower and the middle straps, or the lower
and the upper straps.
Place the gas bottle in the rack.
The gas bottle must be tangent
to the two vertical tubes as
shown on the picture, in such a
way that the pigtail (gas exit) will
be located between these two
tubes.
Attach the buckle straps.
Mount the proper pigtail to the gas bottle.
Connect the pigtail to the pneumatic line (JIC 37° flare fitting). Be
careful, to make smooth bends with the high pressure hose.
Attach the safety cable.
We recommend having the safety cable passing several times
around the bottle neck, then around structural tubes as shown on
the picture.
Safety cable
Bottle neck
Fluid input (Push in)
Buckle strap
Safety cable
