MDG theONE 1.30, User Manual

Page: 11 / 45

theONE
TM
Atmospheric Generator
theONE
TM
User Guide, Rev: A/f 11 / 45
MDG theONE
STANDALONE

Connect the gas inlet to a gas bottle via a
flexible braided Hose.

The gas inlet is a 1/4" male JIC 37° flare fitting.

Connect the liquid reservoir to the liquid inlet
via a 3/8" plastic tube.

Do not forget to open the vent on the reservoir.

Leave the reservoir as close as possible to the
MDG theONE .

Connect the data wiring (Male XLR-5 connector
for DMX/RDM, RJ45 for network).

Connect the power cord.
100–250 VAC, 50/60 Hz, 1480 W.

Open the gas bottle, and check the gauge, on
top of the generator, to verify there is enough
pressure (pressure > 100 psi / 690 kPa - MAX
2500 psi / 17.2 MPa).
The
MDG theONE
is ready to be powered.
Network
DMX In/Out
Keyboard
Liquid Inlet
Power VAC
Gas Inlet
On/Off
LCD Screen
Pressure gauge
USB