www.mdcusa.com
Ph: 833 632 8721
73
B. Turning Off The Furnace
• Set the thermostat to the lowest setting, then turn to the OFF position.
• Turn the manual shut-off valve at the LP tank (if equipped) to the OFF position. Do
NOT force the valve.
• At the exterior access panel, turn the switch on the Furnace to the OFF position.
Inspection And Monthly Maintenance
The manufacturer requires the user to perform regular inspections and have periodic maintenance undertaken
to ensure reliable and safe operation of the appliance. The user must ensure the periodic maintenance is done
as per the manufacturers Operation Manual.
Schematics & Part Numbers
Spare Part Numbers
Part Numbers
Description
Part Number
Offset Cam Adjuster (Camber & Toe Adjuster)
YDZS030
Poly Bush
YJJJ016
Steel Bush Insert
YZCN002
Grease Nipple
6mm Metric
12” Megahub RHS complete (Backing plate, linings &
drum with 14mm studs and nuts)
YZCQ032
12” Megahub LHS complete (Backing plate, linings &
drum with 14mm studs and nuts)
YZCQ031
12” Megahub Drum Only 14mm Studs
YZCQ033
12” LHS Backing Plate Only (With linings)
DM00025
12” RHS Backing Plate Only (With linings)
MJFCX003
14mm Wheels Stud
YHJL110
14mm Wheel Nut
YZCQ029
M38 Castle Nut M38 Metric
LGPJ002
90mm Bearing Dust Cap (3
35
/
64
”) MDC Specific
CSWH001
Wheel Bearing (Timken)
25590
Bearing Race
25590
Bearing Seal Metric 55 x 85 x 12mm
2 ¹¹/64” x 3 ¹¹/32” x
15
/64”