www.mdcusa.com
Ph: 833 632 8721
33
12 Volt Electrical System
Control Panel
Control Panel Use
Main Rotary Switch:
This is used to switch on or isolate the entire 12 volt system.
Circuit Breakers:
The round rubber capped Circuit breakers are resettable. To reset the circuit push in the rubber cap.
Each circuit breaker is marked with the applicable circuit.
Circuit Switches:
Each circuit is individually switched so it may be isolated when not in use.
Voltmeter:
This meter will show battery voltage/state when not being charged and charge voltage when the charger is
activated. Resting voltage of a fully charged AGM battery bank will be 13-13.1 Volts.
Amp Meter:
This meter will show current being drawn from the battery
Internal Lights:
The LED lights inside your trailer are individually switched at each light, with wall switches for groups of
lights. To use internal lights, ensure both wall switch and individual fitting switch are both on, as is the main rotary switch.
External LED Lights:
These lights are switched via the panel inside the main entry and on some models, the passenger
side lights may be switched from inside the side storage area nearest the light.