25
18-CHRONO-SLEEP
Technical Dept. - All rights reserved - Reproduction prohibited
•
When setting a new time slot, this can never be spaced out by just 30 minutes, but at least 1 hour is required
to give the product time to carry out the entire shutdown cycle. By programming a new time slot, there will
therefore be no option to select a time only half an hour after the last shutdown.
•
It is instead possible to program two specific time slots (as in the graphic representation) as in this case the
stove will not switch off but it may be that you only wish to change the temperature SET (from T1 to T2 or vice
versa) or the operation (from AUTO to COMFORT for example).
•
If you set a new time slot that “invades” an existing one, it is assumed that the user wishes to change both,
therefore the new time slot will partially or completely overwrite the existing one.
•
Example:
EXISTING TIME SLOT:
from 06:00 to 12:00 T1 and AUTO and V3
NEW TIME SLOT BEING ENTERED:
from 04:00 to 09:00 T2 and COMFORT
RESULTING PROGRAMMING:
from 04:00 to 09:00 T2 and COMFORT
from 09:00 to 12:00 T1 and AUTO (V3)
•
If you only wish to delete or modify an existing slot, use the dedicated menu described below
•
A time slot can never exceed midnight and therefore if you wish continuous night operation, select the END time
00:00 and on the following day set a time slot with a START at 00:00.
Summary of Contents for SUITE-CLUB-MUSA Hydromatic 18 M2
Page 67: ......
