background image

37

22-USER MENU

Technical Dept. - All rights reserved - Reproduction prohibited

CONTROLS

DISPLAY

CONTROLS

INFO

INFO

LIVE

SET

2142 2100

745 750

181

180

183°

100%

9999h A

ACTIVE

Read-only

Key 

 or  to exit (+beep)

The TIME OUT of this screen is 2 minutes

DATE AND TIME

Once you have entered the menu, the day turns red to indicate where the adjustment of 

the values begins. The 

 buttons and   are lit, indicating which keys are 

enabled for adjustments whereas the others are disabled.

Use the 

 keys to choose the day and   to confirm and move on to the month 

setting, which in turn turns red. Use the same method to then set the current year.

Pressing the   key again moves on to setting the time. The hours turn red.

Adjust the hours with 

 and confirm with   and move on to set the minutes. 

The same procedure applies to set the minutes.

When the   key is pressed to confirm the minutes, all the characters become grey again; 

wait 3” to have a general view of the adjustments made and exit the menu and return to 

the display shown before accessing the menu.

The date and time can both be adjusted with the product ON and OFF (or when first 

started up).

ΔT START&STOP (POSITIVE AND NEGATIVE HYSTERESIS)

  • 

 to change the values

  • The available values from +5 to -5

 • 

 to confirm and return to the previous page 

(+beep)

  •   to exit without confirming (+beep)

Summary of Contents for SUITE-CLUB-MUSA Hydromatic 18 M2





































































Reviews: