46
22-USER MENU
AUSSENTHERMOSTAT (see NTC1 user menu)
If an external thermostat is connected, it is no longer possible to indicate the room temperature recorded by the local probe and adjust
the intended temperature from the panel.
The view on the display will therefore be the following:
ON indicates that the thermostat contact is CLOSED and there is
a power demand.
Therefore the product will run at maximum power until the
temperature is reached and then it will reduce its operation to
minimum.
OFF indicates that the thermostat contact is OPEN and there is NO
power demand.
Therefore the stove will run at minimum until the temperature
drops below the temperature set on the external thermostat.
ON indicates that the thermostat contact is CLOSED and there is
a power demand and therefore the stove will run at maximum
power until the temperature is reached and it will then turn off
according to the START&STOP logics.
In this case, since the temperature hysteresis cannot be managed
(managed by the external thermostat), the reaction times for
restarting or switching off from START&STOP are only linked to the
INPUT/OUTPUT delays from the status (see Chap. START&STOP).
OFF indicates that the thermostat contact is OPEN and there is
NO power demand and therefore the stove will run at minimum
power until the START&STOP INPUT time is satisfied.
In this case, since the temperature hysteresis cannot be managed
(managed by the external thermostat), the reaction times for
restarting or switching off from START&STOP are only linked to the
INPUT/OUTPUT delays from the status (see Chap. START&STOP).
START&STOP).
Summary of Contents for SUITE-CLUB-MUSA Hydromatic 18 M2
Page 67: ......
